Ampere 4.06

Charging is one of the indispensable needs for Android mobile devices. But not always the battery charging performance is as optimal as the original time, how know? The most common way is that you will use tools that measure current in and out, but not everyone knows how to measure it accurately. If you don’t want to use cumbersome hardware devices, you can use Ampere to solve the above problem.Basically, the main function of this application is to provide information about the charging and discharging current on the battery of the mobile device. This will make it easier for users to determine if their device is charging properly, or change chargers if a charging-related problem is detected.

Features:

Measure current: Ampere measures the current being consumed by the device, both charging current and standby current. Users simply connect the device to a charger or power source, open the Ampere application, and measure the current.

Analyze data: Ampere can analyze and display the measured current data to help users understand the energy consumption of their devices. Users can view data such as charging current, standby current, and application consumption current, and can adjust usage habits based on this data to better manage the battery life of their device.

Provide warnings: Ampere can also provide warnings based on the device's battery life and power level to help users keep track of the device's power status so they can recharge or conserve power in a timely manner. Users can set battery level warnings in the app to be alerted when the battery is low.

Display device information: Ampere can also display basic information about the device, such as battery capacity, battery temperature, and so on. This information helps users to better understand the battery status of their devices so that they can better manage the battery life of their devices.

Appears necessary warnings: Necessary warnings will be sent to the device continuously so that users are always aware of their usage situation. First, you need to allow Ampere access to the device’s control memory to be able to maximize its benefits. Of course, the application will not use the access rights to perform bad actions such as stealing information or spreading viruses. After enabling notifications, you will receive notifications related to the battery and charging current on the device.

Highlights:

Keep track of all battery-related status on your devices: Here in Ampere, Android users can enjoy working with the full battery reports with all the necessary data. Start with the charging or discharging status of the devices. You can learn if your device is using power from the battery or directly from the AC charger. Also discover the current health of your battery and its charging level. Learn more about the battery types that you are having on your devices. Discover the current temperature and voltages to make sure that you are safe. The list goes on.

Enable notifications to keep tracks of your devices: For those of you who are interested, you can now enable many important notifications, which are really helpful when keeping tracks of your devices. Also have access to the quick controller on the notification bar with many accessible options to work with. All of which will make your in-app experiences a lot more convenient and reliable.

Protect your devices with necessary alerts: And to make sure that your devices are properly charged or discharged, Ampere will provide multiple alerts if there are any problems with your battery. These could be when the battery gets overheated, the charging current is maybe too high, or the device is being charged incorrectly. Thus, improving your onscreen experiences and making the devices safer, especially if you are always concerned with these matters.

Work on other Android Wear devices: To make the app more convenient, Ampere can work well with other Android Wear devices. Simply connect them to your Android phones or tablets to enable multiple alerts, which will help you better understand the current states of the devices without having to constantly monitor your Android.

Have access to the intuitive home screen widget: Also, to make it easier to keep track of the important measurements, Ampere also enables many useful widgets for Android users to constantly monitor their devices. Feel free to enable widgets for the charging status, battery percentage, temperature, and other measurements. In addition, thanks to the intuitive color setups, the dynamic widget will show you the exact conditions of your battery. Enjoy your peace of mind with green and blue widget. Get a little worry with the orange color. And make sure to check your setup if your widget is full of red.

Functions:

Check charger status on mobile devices: Ampere is an indispensable application for those who use mobile devices. Extremely necessary and plays an important role. Bring tools to test and monitor portable chargers. Ampere has also been used by many people. Control of battery status as well as charging. Give users more peace of mind, avoiding the worst possible scenarios. If you also own a mobile device, do not ignore this application. It will be very beneficial for you to use, overcome the battery and charging problems. Millions of users already use it, you should too! Ampere will not let you down! An application with great functions.

Test tools: Ampere provides tools to aid in the testing process. Helps users to know the battery parameters as well as charging. View current passing conditions according to the analysis of the application. Bringing all relevant information, for the user will know the problems as well as their quality. These tools are indispensable, they all carry their own functions. Helps you to quickly see if the equipment is still up to standard. Whether to continue using or recommend best practices.

Utility applications: Ampere is truly an application with huge benefits. Makes you easily controllable of the device. Ways to deal with all problems can be shown quickly. Ampere will be a great companion for you. Keep an eye on battery and charger issues with you. Shows whether the battery parameters as well as in the device are working properly. Ampere brings functions to meet your needs. Provide timely warnings about bad problems when they happen. For you to have the fastest response. Help your device to be in a stable state. Bring positive effects to users.

Informations:

Please don't use the readings on this app as concrete science. However, the readings are good enough to relatively measure how various chargers and USB cables fair on the same device.

If the app shows 0mA all the time, please use the settings option "Old measurement method". You can force the app with it to use the old measurement interface, if the Lollipop device has at least one.Unfortunately some Samsung devices don't give correct (measured) values (e.g.: S5), just the maximum possible charging current with the actual USB cable/charger configuration. This is a firmware problem.

Background info: The app measures the charging/discharging current of the battery. If your phone is not connected to a charger, you see the discharging current which is negative. If you connect a charger then the current what the charger gives will be used to supply your phone and the remaining power will be charged into the battery.If your phone consumes 300 mA without a charger connected (-300mA on the display), then a 500 mA charger will charge your battery maximum with 200 mA current (200mA on display).

Technical info: The displayed current is an average value from 50 measurements minus the 10 upper values and the 10 lower values. The displayed current can be shaky or unstable or even zero which means, that the Android system provides unstable values. Every company uses different battery types and other hardware making it difficult to get accurate results about your charger.

LiPo batteries don't draw the maximum for the full time it takes to charge the phone. If your battery is charged almost full then the charging current will be much less as by lower battery levels.

Summary:

Ampere – dash application is a tool for those who are not indifferent to such a feature of the existence of their mobile gadget as the charging process. Often, even chargers of the same configuration have different values and indicators. Which leads to the fact that somewhere the gadget replenishes energy faster than from another source. What, how, why and what values – Ampere answers these points. Indicators, statistics, features, properties and much more will be provided as clearly as possible and in an understandable form. Simple, fast and convenient.